Shoulder Suspension/Rotation Support

Regular price $48.50 CAD Free shipping on orders over $49
Shipping calculated at checkout.

This shoulder support helps you heal from tendonitis and overuse injuries.


  • The chest strap attaches to the shoulder sleeve in the front and the back to give you more control over the position of your elbow
  • The edge of the sleeve at the bicep has a grippy lining to keep the sleeve from moving
  • Has an adjustable opening at the bicep for a comfortable fit
  • Made of Neoprene which warms the shoulder to promote blood flow and healing

Putting the Support On

If possible, get someone else to help you put this support on the first time. Once it is fit properly, it is easy to put on by yourself. If you are fitting this support by yourself, you may have to spend more time adjusting the straps.

  1. Remove the Velcro flap at the end of the arm sleeve and reattach as it loosely as possible
  2. Undo the Velcro on the long strap and pull it through the D-Ring on the front of the shoulder sleeve so that it’s only attached to the D-ring on the back.
  3. Put your arm through the arm sleeve and pull it up until it is resting comfortably on your shoulder.
  4. Grab the Velcro end of the long strap and pull it back through the D-ring on the front of the shoulder sleeve. Attach the Velcro end to the strap going across your chest so that it’s comfortable – not too loose or too tight.
  5. If possible, get someone else to adjust the strap on the back of the support so that it pulls your shoulder back slightly. If you are fitting the support on your own:
  6. Note how far you pulled the Velcro strap through the D-ring on the front
  7. Undo the strap on the front of the support
  8. Take the support off and reattach the Velcro strap on the front of the support in the same place it was
  9. Adjust the placement of the Velcro on the back strap so that it is tighter by 1-2 inches
  10. Put the support on again and assess the fit
  11. Readjust as necessary
  12. Tighten the Velcro flap around the bicep so that it is comfortably snug.

Taking the Support Off

  1. Loosen the Velcro tab on the bicep so that the sleeve is loose
  2. Loosen the Velcro strap on the front of the support without letting the strap go all the way through the ring
  3. Put your free arm on the inside of the chest strap and pull the strap over your head
  4. Slide the bicep sleeve off your arm
  5. Leave the support in this configuration to make it easy to put it on next time.
Careful washing will prolong the life of the brace. Remove all stays before washing. Hand wash with a non-detergent washing solution, and air dry (away from the sun and heating vents). Do not put the brace in the washing machine or dryer.